You are currently viewing Why Power Window Not Working On Driver Side?

Why Power Window Not Working On Driver Side?

Windows are necessary both in the house as well as in the car. They are usually meant for providing or maintaining ventilation of air in our surroundings. Similarly, car windows are mandatory to generate a relaxed, calm and fresh atmosphere in the car. Overall, their primary purpose is to provide new and a well-ventilated room.

The windows in a car are referred to as the power windows. And they are regulated either manually or through the switch. There is a window located at the driver’s side known as the driver’s power window. It is a multi-task window as it can control all the other windows located on the passenger’s side along with multiple functions. The fault or failure in these power windows, especially the driver’s power window, may result in many issues, not only with the opening or closing of windows but with all other functions controlled by it.

So, to deal with such uneven issues, our article will provide you with all the necessary information regarding power windows not working on the driver’s side. We help you figure out your problem and discuss the details to fix the issues as well.

What Do You Mean By Power Window In Car?

The power windows in the car are responsible for various functions, especially the driver’s power window. The driver’s power window has a remarkable ability to control the passenger window’s activities.

Most appropriately, these windows are referred to as power windows because they can see shut or open with the help of buttons. These windows were first introduced in the; it consists of generally four essential components. These are the battery, a motor, a switch, and a gear.The purpose of the power window control system is to raise and lower the door glass with the help of a switch, and the use of multiple sensors controls its operation. These sensors include LPG sensors, LDR sensors, and position sensors to replace the hand-turned crank handle.

Why power window not working on the driver’s side?

There may be a variety of reasons responsible for generations of such frequent issues. Here, our article is going to discuss a few most common culprits of the problem. So, let’s begin with a discussion:

1. Bad Window Regulators

Regulators are meant or used for maintaining a designed characteristic in vehicles or any other device. They are generally automatically controlled devices. The window regulator in the car is the mechanical assembly that moves the window up and down. When the power is supplied to the motors is connected to it, they are usually mounted inside the door panel.

More appropriately or in the easy term, the mechanism that permits a power window to move above and down is called a window regulator. They are always present along with the power window for proper motion or movement when required.

The fault or malfunctioning in the power window switch would result in difficulty during the window’s operation. Thus, in such cases, we need to replace the regulator of the window.

2. A Blown Fuse Or Burned Out Motor

A blown fuse is one of the common problems faced by the car during a faulty power window. One can quickly identify this problem while listening to various uneven sounds produced because of the blown fuse.

If you hear whirring or clicking noises, the most common reason behind this is the electrical problem in the motor.

So, you need to install a new fuse in such cases or situations if it is wholly burned. Also, the whole system needs to check for the problem as there are chances that other faults may also develop due to this problem.

There were conditions when the motor itself burned or damaged, not the full fuse. Thus, here you need to replace the engine with a well-trained professional.

3. Snow And Ice

These are the conditions developed in the countries or areas of a cold region or low temperature. Many snowy and icy conditions are not suitable for the functionality of power windows, particularly on the driver’s side. The reason is that the glass of the windows will stick to their frames.

The regulators responsible for regulating the functions related to the power window would be worn out due to these frozen frames over the window. Thus, the proper repair and maintenance are necessary for long term service.

4. Poor Wiring Issues

There are multiple series of wires that interconnect the window switch to the window motor. I know it is pretty uncommon to develop defects or faults related to wires of the window, but still, it can occur.

There are conditions that recently while having your vehicle repaired or serviced, the mechanic by mistake cut or misconnected the power switch’s wire. All this would result in the creation of a new problem for your vehicle. Hence it would be best if you visited the mechanic once more.

We also request you to do all these repairs as soon as possible to avoid further issues.

How Much Does It Cost To Install A Power Window?

The installation of a power window is pretty expensive both in developing as well as developed countries. The average installation price is about $100 to $250. However, it varies from place to place and also depends on the model of the car. Also, these cost does not include labour charges.

We would suggest to you from our knowledge and experience that installing expensive s might waste money, but trust us they are a long-term investment.

Frequently Asked Questions:

So, here are some of the frequently asked questions about why would only one power window not work why is only my driver side window not working, how do I reset my driver side window etc?-

Why Would Only One Power Window Not Work?

If only one window does not work, the problem could be a bad relay, a bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch to have your power window switch replaced.

Why Is Only My Driver Side Window Not Working?

Check the wires on the driver. If the wires are broken or torn, you can fix it by connecting broken wire. If the fuses and wires are in good condition and the parts , the problem might be with the window switch

How Do I Reset My Driver Side Window?

First you should hold the key down for 2-5 seconds after the window is down.

Once your window is down. Release the button after you’ve held it down. The required time to reset the window is 2 seconds. On others, it is 5 seconds.

Where Is The Fuse For The Driver Side Window?

First you should Check the fuse first. Refer to your owner s manual for the location of the fuse panel, on the driver s side kick panel, or a side panel in the centre console.

How Can You Tell If A Window Fuse Is Blown?

In some cases, you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire, metallic smear inside the glass then needs to be replaced.

How Much Does It Cost To Fix A Window That Won’t Roll Up?

To fix a window that won’t go up can be $20 or less if you’re only dealing with a new fuse. For more complex repairs, the door to access the window motor can run $250 to $400.

Conclusion

Most automakers have done away with the old crank styled windows and manual door locks with the growing technologies. But still, most of the exact vehicles consist of them, thus generating a wide variety of problems.

We hope all the readers are satisfied and received the answer they expect. So, whenever your power window was not working on the driver’s side, we hope you could handle it smoothly and calmly without facing problems.

If your doubts regarding the topic persist, comment below in the comment section. And you will receive all your answers as soon as possible.