You are currently viewing How To Reset Service Suspension System?

How To Reset Service Suspension System?

We're an affiliate

We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!

A suspension in the car is a system that deals with the height of the vehicle. It is one of the essential parts that help maintain the comfort level in the vehicle by reducing or eliminating the shock experience while driving. Do you know how to reset service suspension system in vehicles? We expect most of the people are searching for the same answer. So, here in this article, we will discuss every point related to the topic as it would help you know the things in detail and hence can quickly solve the issues regarding it without facing too many problems.

What Do You Mean When Your Car Says Service Suspension System?

Whenever a service suspension-related message is present or emerges in the vehicle on the driver information centre (DIC), it signifies certain things. It denotes that the rear suspension height may be lower than usual under heavy payloads.

Upon inspection, it determines that the hose is either damaged or face any malfunctioning. There are also chances to get disconnected from the air inlet filler of the automatic level control (ALC) suspension air compressor.

Also Read:  How To Stop Car Door Rattling From Speakers?

The most common cause behind such issues is the moisture getting into the sensor. Therefore, proper maintenance and regular service of the vehicle should perform to avoid all these problems.

How To Reset Service Suspension System?

Fixing a service suspension, you first need to find the reason or cause of the problem. Various issues could lead to the initiation of the faulty system, like air shock could be wrong, the airline could break, or fault ride height sensor, etc.

Resetting the service suspension system requires specific sequential steps to be followed, so let’s discuss some of the essential steps mandatory for properly working on the suspension in the car.

1. Shut Down Your Vehicle

The first step regarding the initiation of the problem is to shut down your car to avoid and prevent any severe damages or injuries. Push the trunk release switch, which is present on the bottom part of the driver-side door panel.

The step must perform soon with the initiation of the issue. Otherwise, the problem in the vehicle may extend to a higher amount.

2. Step To Rear Of The Vehicle And Open The Trunk

Here in this next step, it would be best to move on to the rear or back portion of the vehicle. Check all the changes or damage over here and fix them if you can or consult a professional for the purpose. After all, it’s a critical task to perform yourself as it includes multiple wiring and circuits.

And you need to perform all these steps by opening the trunk carefully and slowly as we cannot afford the new problem without fixing the previous one.

Also Read:  How To Get Rid Of AC Clutch Noise When Not Engaged?

3. Push the Switch Off In-Service Suspension System

After coping and completing the above process, the next step includes the shut-down of the air suspension system. The switch is responsible for turning on and off the suspension system, usually located on the kick plate on the passenger-side floorboard.

While performing the step, make sure the switch is in the on position. The faulty or improper functioning of the air compressor is the most common reason for the check air suspension light in vehicles.

4. Push The Switch Onn In-Service Suspension System

It is the last step; you need to switch on the switch that you initially turned off in the previous step. The procedure for switching on is similar to that of switching off, as mentioned above.

Hence, at this point, your task is completed, and you will reach your desired destination. You need to follow all the steps sequentially and carefully one by one, and the problem will solve.

What Does Check Suspension Light Mean?

All the warning lights present in the car determine one or the other preventive measures to avoid the sudden generation of the problems. The car’s computer generally turns on the air suspension warning light to detect or analyze any abnormal activity within the system.

Typically, such situations will occur if the compressor would unable to fulfil the required demand, I.e. isn’t providing as much air as it should. It may also experience such issues if there is a leak in one of the bags.

Why Does My Car Say Service Ride Control?

Service ride control in-car generally signify that your compressor is out and need either repair or replacement. The shocks have airbags on them, and they get holes or rupture if you won’t compress them before lowering the vehicle if it’s on a jack. The compressor burns itself completely if you repeatedly try to fill the bag without any guidance or knowledge.

Also Read:  Car AC Not Blowing Cold Air When Idle? 7 Fixes To Try

How Much Does It Cost To Fix The Air Suspension?

The suspension related issues are pretty expensive to repair. Hence, we would suggest you save your vehicle from such replacement by proper servicing the cars and act in time after the emergence of the suspension lights in the car.

The average cost of the suspension repair may range between $1000 to $5000. The fee includes the labour charges and may differ according to the garage or the auto mechanic. However, the prices of the suspension system may vary according to the place and location. It also depends on the make and model of the car, and extra charges may add with the repair or replacement of worn-out parts.

Conclusion

We hope the information mentioned above help and guide you in attaining the desired results. After going through the content, we expect you to know how to reset service suspension system and deal with the situation smoothly and efficiently. All the matters or points discussed above will help to increase the comfort level and your requirement.

However, we had tried our best to clear all your concepts with a detailed explanation. If your doubts or queries related to the topic persist, we request you to comment below in the comment section. And we will try to make extra efforts to answer all your questions as quickly as possible.