Stabilitrak is the name given to GM’s ESC. They are generally regarded as the essential components in the vehicle for smooth and proper working. The fault in it needs immediate correction and appropriate service. 
Here, in this article, we will discuss the essential points regarding the StabiliTrak of the vehicles, its essentiality, and how to deal with it. We will also cover some frequently asked questions in the topic further.
However, the article’s main content revolves around how to turn off the StabiliTrak in the car. It includes a simple procedure that needs to follow correctly to attain the desired result. So, let’s begin with the topic,
Table of Contents
What Is Stabilitrak In The Cars?
Stabilitrak is referred to the GM’s proprietary electronic stability control (ESC). It is considered the standard safety measure present in all vehicles. In this, the car applies the anti-lock brakes to the slipping side. All this diverts the power to the non-slipping side to continue the vehicle’s motion in the forward direction.
Whenever the service StabiliTrak is switched on, it usually means nothing to worry about. It signifies that StabiliTrak is currently not available to initialize. And this could occur because of specific reasons like poor road conditions or improper tire size. However, usually, it vanishes within no time, but if it continues, then you should take your vehicle to the service centre.
How To Turn Off Stabilitrak In Vehicles?
The StabiliTrak and traction control system (TCS) are crucial parts of the vehicle responsible for maintaining safety. They usually limit the wheel spin and ensure safe and secure driving, especially in adverse or uneven weather conditions.
Turning off the StabiliTrak is the most frequently asked question by vehicle owners. However, the procedure is different in different models of cars. Thus, we need to consider various techniques depending on the make and model of the vehicle. So, let’s begin with the discussion of few methods in certain cars.
1. Toyota
The switching off of the StabiliTrak in Toyota is a pretty straightforward procedure to follow. You can do this by simply searching for a VLC button, which is meant for the purpose.
Get your hand on that and push it. And remember to hold it for few seconds and do not release it fast. Thus, your task is completed. Soon, it will disable both VSC and TRAC, and the message is seen on the dashboard.
2. Ford
For the ford or identical vehicle to it, you can use this process for the purpose. First, you need to find the location of the StabiliTrak sensor in your car and for this, go through the car’s menu. Steering wheel controls are essential in such kinds of situations. Look for the black arrow over the left side of the steering wheel and press it to initiate the function.
Soon after following the above steps, go to the settings and search for option driver assist and press the ok button. After this, select the drive control option, which would appear in front of you. Thus, you succeeded in completing the procedure, and now you are ready to go.
3. Volkswagen
The process applied to these vehicles is quite different from the above two. You first need to convert the accessory mode keeping the ignition in position but do not start the engine. Next, press the triangle button, which would activate the warning lights.
As soon as the warning lights switched on, slowly press the accelerator pedal five times. It would cause the car to lurch forward and the traction control (TC) to come back on.
Turning off the StabiliTrak would disable specific safety measures in the Volkswagen; therefore, we recommend you to reactivate after you are done.
4. Chevrolet And GMC
It would be best to press the centre button in the centre stack in such models or related vehicles. You have to hold the button for few seconds, and soon traction control lights are seen.
After this, your task is completed, and you don’t need to do anything. The StabiliTrak of the car will work automatically. In such cases, you must also know that the traction control will be switched off too.
Is It Safe To Drive With Stabilitrak Off?
It is safe to drive only when the system is engaged, i.e., when the TCS light is on and appears on losing traction. Going without traction control can make your vehicle susceptible to spinning out and sliding around the road, thus, prone to accidents. Therefore, an active traction control system is necessary for maintaining the grip in slick conditions.
Where Is The Stabilitrak Button Located?
The StabiliTrak button in most of the vehicles is located on the centre console. It is the common site where you can find the switch. However, if you do not find the button on your console, your vehicle does not have the StabiliTrak.
How Much Does It Cost To Fix The Stabilitrak?
The replacement and repair of StabiliTrak are pretty inexpensive. If you are thinking to replace your vehicle traction control or StabiliTrak, then the average cost for the procedure would range between $80 to $90. It includes the labour cost, which is approximately $30 to $50, and particular minute parts may range from $20 to $40.
However, the prices may differ according to the location and the make and model of the car. So, overall its expenses are not much expected in the case where you need to fix the service StabiliTrak message problems and require sensor replacement. The cost of fixation here may lie between $250 to $400 apiece.
Conclusion
We hope the information mentioned earlier guide and help you attain the desired result. Thus, now we expect you to efficiently deal with and know how to turn off StabiliTrak in the vehicles. Although every car model has its specific procedure regarding the topic, all are pretty simple and easy to perform if appropriately followed.
If your doubts or queries regarding the topic persist, comment below in the comment section. And we will surely answer all your questions as quickly as possible.
